MTQ1461

MTQ1461 is a multi-function System Basis Chip (SBC) sensor designed for CAN automotive applications as main supply for the microcontroller and as interface for a CAN bus network. The chip is capable of withstanding the severe conditions of automotive applications. 

MTQ1461 incorporates a variety of functional blocks to support these applications, such as two 5V low-dropout voltage regulators (LDO), a HS-CAN transceiver, a high-voltage GPIO with embedded protective functions and a 16-bit Serial Peripheral Interface (SPI), a configurable timeout/window watchdog circuit, etc. 

For applications connected permanently to the battery, the chip operates in low-power modes to minimize current consumption. A wake-up from the low-power mode is possible via a message on the CAN bus, via the bi-level sensitive monitoring/wake-up input as well as via Cyclic Wake. 

• Very low quiescent current in Stop/Sleep Mode 
  

• Periodic Cyclic Wake/Sense in SBC Normal/Stop/Sleep Mode

     ·5V LDO 150 mA (250 mA peak) LDO for main supply 

     ·5V LDO 100 mA, protection feature for off-board usage 

• Supports 5M bit/s FD and features CAN Partial Networking & CAN FD tolerant mode according to ISO 11898-2:2016 & SAE J2284 

• Charge pump provides reverse-polarity protection, load switch, and spread spectrum modulation for EMC performance. 

• Universal HV wake input for voltage monitoring and wake-up detection 

• Configurable GPIO as Fail Output, Wake Input, Low-Side switch or High-Side switch 

• HV measurement function as alternative pin assignment 

• Fail Output for Fail-Safe signalization 

• Configurable wake-up sources 

• Reset & Interrupt outputs 

• Configurable timeout and window watchdog 

• Over temperature and short circuit protection feature 

• Optimized for Electromagnetic Compatibility (EMC) and low Electromagnetic Emission (EME) 

• AEC Qualified and RoHS compliant